| 446100, Russia, Samara region, Chapaevsk, Kuibyshev str., 1 |
| 8 (84639) 2-11-55 We work from 8:00 to 17:00 |
Write to us |
Promulit TS 20.51.11-013-43908744-2020
Designed for blasting operations on the Earth's surface during manual loading of dry and flooded wells, including in rocks and ores containing sulfides, with a rock strength coefficient on the M.M.Protodyakonov scale up to 16, suitable for use at ambient temperatures from minus 25 0 C to plus 50 0 C.
|
Class of explosives according to the conditions of use in accordance with the requirements CU TR 028/2012 |
Group of explosives according to the conditions of use in accordance with the requirements of CU TR 028/2012 |
Subclass of explosives in accordance with the requirements of CU TR 028/2012 |
Compatibility group in accordance with the requirements of CU TR 028/2012 |
UN Serial Number |
|
1 |
2 |
3 |
4 |
5 |
|
1 |
|
1.1 |
1.1 D |
0082 |
|
The name of the indicator |
Standard, % |
|
The appearance of the explosives |
Plastic mass of yellow-brown color |
|
Composition: - ammonium - water - industrial oil - perlite sand |
61,5 13,0+2 2,0 5,0+1,0 |
|
The density of explosives in the cartridge, g / cm3 |
1,10 – 1,25 |
|
Cartridge diameter, mm
|
75 + 1 |
|
Cartridge weight with shell, kg, for diameter, mm 75
|
2,4 + 0,1 |
|
Detonation of two simulated samples –cartridges with a diameter of 60 mm, weighing 1.0 kg, connected butt-to-butt, when initiated from an intermediate detonator |
Full |
Uncontrolled explosive characteristics
|
Characteristic |
Meaning |
|
Settlement |
|
|
Heat of explosion, kcal/kg |
650-670 |
|
Oxygen balance, % |
Minus 6 |
|
Specific volume of gaseous explosion products, l/kg |
900-950 |
|
Experimental |
|
|
The detonation rate of a charge in an open charge with a diameter of 60 mm at a density of 1.10-1.25 g /cm3, km/s |
4,0-4,5 |
|
Critical diameter of the open charge from the intermediate detonator, mm, no more |
24 |
|
Gas hazard (concentration of harmful gases in explosion products in terms of conditional carbon monoxide), l/kg |
No more than 40 |
|
Brisance according to GOST 5984-99 section 4, mm: - open charge - in a steel ring |
12-13 22-23 |
|
Sensitivity to impact according to GOST 4545-88: - the lower limit in the device is 2, mm, more - frequency of explosions in the device 1, % |
500 0 |
|
Sensitivity to friction during shock shear on the K-44-3 device according to GOST R 50835-95: - lower limit, MPa/(kgf/cm2) |
~ 1200 (12000)
|
|
High explosive according to GOST 4546-81, section 2, on a ballistic installation relative to TNT, at least |
0.9 |
|
The temperature of the beginning of thermal decomposition, 0 C |
250-255 |
|
Flash point (thermal self-ignition) at a delay time of 60c, 0 S |
326-338 |
|
Thermal stability of poremite without shell in contact with sulfide ore at a temperature of 50 0 C for 7 hours |
Stable |
|
Detonation of two simulated samples –cartridges with a diameter of 60 mm, weighing 1.0 kg, connected butt-to-butt, when initiated from an intermediate detonator after exposure in water at a pressure of 0.2+0.02 MPa for 10 days |
Full |
It is transported in covered vehicles by rail, sea, river or automobile modes of transport in accordance with the rules for the transportation of dangerous goods of hazard class I, valid for the corresponding mode of transport.
The number of the emergency card containing safety measures in case of emergency situations on railway transport is 114, standard emergency card No. 1 according to the "Safety Rules for the transportation of explosive materials by road" (PB 13-78-94).
The code of emergency measures applicable to transportation by road is 24E.
Finished products are fed into a welded or whole-stretched sleeve made of polyethylene film grades M, T, N according to GOST 10354-82 with a thickness of 0.1-0.2 mm. Finished cartridges are packed in transport containers, which are used as corrugated cardboard boxes with the designation 4G according to GOST 26319-84. Laying cartridges in a corrugated cardboard box is carried out in accordance with the requirements of OST 84-2210-85. To prevent the movement of cartridges in the box during transportation, the voids are laid with clean paper or cardboard scraps. The net weight should not exceed 25 kg.
9 months from the date of manufacture
QUALITY ASSESSMENT
Feedback is important to us. Please share your opinion about working with us. Write
